Three-roll plate bender

RBD-3M

Top & bottom roll driven by motor
Position of the top roll is fixed via a locking lever
Conical bending is realized via a coupling which is mounted on the shaft to the side roller drive
Fixed upper roller, movable bottom and side rollers
Wire insertion groove on the lower roller
Left-right rotation on dual footswitch

	Double footswitch
	Cable safety system
	Fine bending with motor brake
	Rolls made out of SAE 1050 (CK 45) steel
	Manual

Technical specifications		10/2.0	10/3.0	12/1.5	RBD-3M 12/2.5	15/1.2	15/2.0	20/1.0	20/1.5
Roll length	mm	1050		1250		1550		2050
Max. pre-bend	mm	2.0	3.0	1.5	2.5	1.2	2.0	1.0	1.5
Roll diameter	mm	Ø75	Ø90	Ø75	Ø90	Ø75	Ø90	Ø75	Ø95
Min. bending diameter	mm	Ø112	Ø135	Ø112	Ø150	Ø112	Ø135	Ø112	Ø142
Plate rolling speed	m/min	6
Motor power	kW	1.1
Length	mm	1610	1630	1830	1850	2110	2130	2610	2630
Width	mm	700
Height	mm	1160	1200	1160	1200	1160	1200	1160	1200
Weight	kg	380	480	405	520	420	600	590	715
Item-No.		9401001	9401002	9401003	9401004	9401014	9401015	9401016	9401017