deutsch   english   us   russian
KAAST. YOUR PRODUCTION PARTNER!
Neumünster: +49 4321 25 2003-0
Catalog Machine Tools Accessories
background image

Machine Tools Accessories

Chucks, faceplates, accessories, power chucks, collet chucks


Screw sets for base jaws

Scroll plate

Pinion for cast iron chucks

Pinion for steel chucks

Studs, DIN 55027

Studs, DIN 55029 (Camlock)

Wrench for lathe chucks

According to DIN 55026, semi-machined

According to DIN 55027, semi-machined

According to DIN 55029, semi-machined

According to DIN 55026, chuck-side pre-machined and drilled

According to DIN 55027, chuck-side pre-machined and drilled

According to DIN 55029, chuck-side pre-machined and drilled

Adaptor plates according to DIN 55026 fitting to power chucks

According to DIN 55026, with bore

Pneumatic power chucks with centre mount

Centre mount, with bore

Centre mount, with bore

Soft top jaws, piece

Hard top jaws, piece

Centre mount, with bore

Centre mount, without bore

According to DIN 55026, without bore

Wrench for lathe chucks

Clamping force meter for three-jaw chucks

Universal angle collet chuck

Collet chuck for dead-length collets

5C-Collet chuck

5C-collet chuck with radial fine adjustment

Collet chucks CR power operated

Pneumatic collet chucks

Collet fixture

Three-jaw lathe chuck Wescott, centre mount

Four-jaw lathe chuck Wescott, centre mount

Hard reversible, stepped jaws

Soft solid jaws

End mill adaptors WELDON, DIN 2080

Collet chucks ER DIN 2080

Collet chuck OZ, DIN 2080

End mill adaptors WELDON, DIN 69871

End mill adaptors WELDON, DIN 69871

Collet chucks ER, DIN 69871

Collet chucks OZ, DIN 69871

Collet chucks ER - form A

End mill adaptors WELDON - form A

Lathe chucks 6454, one-piece jaws

Lathe chucks 8454, one-piece jaws

Lathe chucks 8457, one-piece jaws

Lathe chucks 8459, one-piece jaws

According to DIN 55029, two-piece jaws

Centre mount, two-piece jaws

According to DIN 55026, two-piece jaws

Type M

Centre mount

According to DIN 55026

According to DIN 55027

According to DIN 55029

Jaw turning fixtures for four-jaw scroll chucks

Jaw turning fixtures for three-jaw scroll chucks

Jaw turning fixture for power chucks

For internal and external clamping

Hard reversible jaws for independent chucks

Hard master jaws for independent chucks

Hard reversible top jaws for independent chucks

Soft top jaws for independent chucks

Internally stepped solid jaws for lathe chucks

Externally stepped solid jaws for lathe chucks

Hard base jaws for lathe chucks

Hard reversible top jaws for lathe chucks

Soft top jaws for lathe chucks

Soft solid jaws for lathe chucks

Pie jaws for three-jaw lathe chucks with ISO cross tenon

Soft top jaws - for TOS-lathe chucks

Soft solid jaws - for BISON-lathe chucks

Soft top jaws - for BISON-lathe chucks

Soft solid jaws - for TOS-lathe chucks

Hard reversible, stepped jaws

Soft solid jaws

Hard reversible stepped jaw, piece

Hard base jaw, piece

Soft top jaw, piece

Hard reversible top jaw, piece

Soft solid jaw, piece

Collet chucks ER MAS BT

Collet chucks OZ, MAS BT

soft pie jaws for power chucks, set

Quick-change tapping chucks with length compensation, VDI (DIN 69880)

Quick-change tapping chucks with length compensation, HSK (DIN 69893)

Safety drive rings

Lathe chucks 8653, one-piece jaws, radial

Lathe chucks 8663, two-piece jaws, radial

T-nut for power chucks, piece

Centre mount, two-piece jaws

Lathe chucks, one-piece jaws - cast iron

Lathe chucks, one-piece jaws 8353 - Steel

Lathe chucks 6363 & 8363, two-piece jaws - Cast iron & Steel

Lathe chucks 8356, one-piece jaws

Lathe chucks 8357, one-piece jaws

Lathe chucks 8367, two-piece jaws

Lathe chucks 8359, one-piece jaws

Lathe chucks 8369, two-piece jaws

Lathe chucks 8363, two-piece jaws, radial

Lathe chucks 8353, one-piece jaws, radial

Lathe chucks K635Z, one-piece jaws

Collet chuck

Wrench for collet chucks

Lathe chucks 6252

Clamping devices


Dividing plates for rotary tables

Tailstocks for rotary tables and dividing heads

Tailstocks

Adaptor plates for rotary tables

Centering arbors for rotary table adaptor plates with morse taper

Angle plate, adjustable

Angle plate, adjustable by worm gear

Box jaws type HB4

Set of 4 pcs.

Cross and slide table Type CP

Cross and slide table Type MF

Cross table Type MG - rotatable

Cross table MF MINI

Cross table Type MF DRILL

Cross Table MG MINI - rotatable

Super indexing spacer with hand wheel

Semi-universal dividing head

Universal dividing head

Rotary table incl. three-jaw lathe chuck, fully mounted

Indexing fixture incl. three-jaw lathe chuck, fully mounted

Four-jaw chuck with swivel base

Three-jaw lathe chuck with angle drive

Three-jaw chuck with swivel base

Permanent magnetic plate

Round permanent magnetic plate

Fine pole permanent magnetic plate

Fine pole round permanent magnetic plate

Rotary Table, Type UT

Adaptor plates suitable for type UT

Precision rotary table

Stationary three-jaw chucks, extra thin

Stationary four-jaw lathe chuck

Adjustable swivel angle plate, type HWCK

V-blocks with clamping bracket

V-blocks

Sleeves and arbors


According to DIN 6328 for taps or DIN 6329 for spiral drills

For machines with synchronous tapping equipment

Combination shell mill adaptors DIN 2080

Long milling arbors

Combination shell mill adaptors, DIN 69871

Combination shell mill adaptors DIN 6358 - form A

DIN 2187, completely hardened and ground

Combination shell mill adaptors, MAS BT

DIN 2185, completely hardened and ground

Mechanically sealed up to 60 bar

DIN 238, Taper arbors with morse taper shanks

With draw-off thread and nut

Type 236

DIN 228 A

Taper arbors with thread

Test arbors for steep taper - DIN 2080

Test arbors for steep taper - DIN 69871

Test arbors for HSK - DIN 69893

Test arbors for morse taper - DIN 229

Test arbors - cylindrical

DIN 69880

Drill chucks


Keyless drill chucks

High-precision keyless drill chuck

Drill chucks DIN 69871 - Short version

Drill chucks DIN 2080

Drill chuck with morse taper and tang

Drill chucks DIN 69871 - Standard

Drill chucks DIN 69871 - AD

Drill chucks 69871 - ADB

Drill chucks MAS-BT - Standard

Drill chucks MAS-BT - AD

Drill chucks DIN 69893 - AD (HSK)

Drill chucks DIN 69880 (VDI), with coolant nozzles

Drill chuck with cylindrical shank Weldon

With polygonal taper

VDI-tool holder for CNC lathes


O-Rings

Reduction sleeves RZ, slotted

Reduction sleeves for boring bar holders type E2

Ball spray nozzles

Bar puller, type SG25

Broach tool holder

Broaching cutters

Floating chucks with internal cooling

Protective plug Z2, steel

Protective plug Z2, plastic

Setting holders

Test arbors - DIN 69880 (VDI)

Type D1, multiple square tool holder

Type D2, multiple square tool holder, inverted

Parting off tool holder, right-hand

Parting off tool holder, left-hand

Type E1, U-drill holder, IC

Type E2, boring bar holder, IC/EC

Type E3, collet chucks OZ, for collets DIN 6388

Type E4, collet chucks ER, for collets DIN 6499

Type E2S, toolholder slotted, reduced vibration

Type F, Morse taper holder

Bar puller, type SGF

Type E8, boring bar holders with 2 bores

Type E8, Boring bar holders with 2 bores

Type A1, rectangular soft blank*

Type A2, round soft blank*

Type B1, radial tool holder, right-hand, short

Type B2, radial tool holder, left-hand, short

Type B3, radial tool holder, inverted, right-hand, short

Type B4, radial tool holder, inverted, left-hand, short

Type B5, radial tool holder, right-hand, long

Type B6, radial tool holder, left-hand, long

Type B7, radial tool holder, inverted, right-hand, long

Type B8, radial tool holder, inverted, left-hand, long

Type C1, axial tool holder, right-hand

Type C2, axial tool holder, left-hand

Type C3, axial tool holder, inverted, right-hand

Type C4, axial tool holder, inverted, left-hand

Revolving work piece stop

Machine vices


Machine vice type MSK3

Transformator

Swivel plate

Swivel plate

Grooved jaw

Plain jaw

Soft machinable jaw

Extra-high jaw

Prism jaw

Prismatic stack type jaw

Pull-down jaw

Extra-high pull-down jaw

Swivel plate

Plain jaws, set

Pull-down jaws, piece

Prism jaw, set, 1 pc. with prism, 1 pc. plain

Grooved jaws, set

Spindle, complete

Extension sleeve for crank

Hand crank

Set of seals

Tee nutzs for machine vices, set of 2 pieces

Angle plate, type AW

Plain angle plates, type AWG

Angle plate with t-slots, type BP22

Clamping cube, type BP07

Clamping cube, type BP07

Clamping force meter for vices

Double vices Type TLD

Drilling machine vice type MSP

Type EMC, Standard

High-precision erosion vices, type SESP

Acid-proof and corrosion-resistant design

Grinding and erosion vice

Type MSK without swivel plate, mechanical

Type MSK with swivel plate

Movable jaw section type CMC

Multiflex vice type MFS

High-power vice with mechanical force increase type MC2

High-power vice with mechanical force increase, type MC2 long

In wooden case

In wooden tray

Pneumatic vice type PSP

Precision machine vice type CMC

Type SP.81, mechanical - modular system

Type ISP.81, mechanical-hydraulical - modular system

Type OSP.81, pneumatic-hydraulical - modular system

Type EDMA.99, mechanical

Self-centering vice type ZSM2

Sine vice TMV-SA, with quick adjustment

Sine vice TMV-SB, screw type

Prismenbacke, Stück

V-jaw, piece

Fixed jaw, piece

Movable jaw, piece

Stepped jaw, fixed, piece

Stepped jaw, movable, piece

Movable jaw, plain, piece

Movable jaw, serrated, piece

Movable jaw, enlarged, plain, piece

Fixed jaw, piece

Stop-Dog

Table vice type WBS

Table vice type WBS - heavy duty

Telescopic holder for table vices

Tool maker's vice TMV-A with quick adjustment

Tool maker's vice TMV-B, screw type

Universal prism jaw with work stop

Hydraulic machine vice typ FHS

Collets


For collets

for collets and collet chucks

Collet sets ER in aluminium case DIN 6499, 1 mm stepped

Collet sets ER in wooden tray, DIN 6499, 1 mm stepped

Collet sets OZ in aluminium case, DIN 6388, 1 mm stepped

Collet sets, 385 E (5C), round, in wooden tray

Sealed collets ER/ESX, DIN 6499, 1 mm stepped

Collets OZ, DIN 6388A, 0,5 mm stepped, single slotted

Collets OZ, DIN 6388, 0.5 mm stepped, double slotted

Collets ER/ESX, DIN 6499, 0.5 mm stepped

Collets ER/ESX, DIN 6499, 0.5 mm stepped

Precision design, collets ER/ESX, DIN 6499, 1 mm stepped

Collets, round, 1 mm stepped

Collets DIN 6343, 1 mm stepped

collets with length compensation

Morse taper collets for direct clamping

For collets DIN 6343

Stop screws for 5C-collets

ER32-GB with internal square

ER40-GB with internal square

ER50-GB with internal square

ER16-GB with internal square

ER20-GB with internal square

ER25-GB with internal square

Tool holder MT-SK-HSK-Angle milling head


90° Angle heads for milling machines, DIN 2080

90° Angle heads for milling machines, DIN 69871

90° Angle heads for milling machines, MAS BT

Coolant tubes

Aluminium assembly support

Assembly block VDI, tiltable

Assembly block DIN / ISO / BT

Assembly support, tiltable

Collet chucks ER with cylindrical shank and mini nut

Type AKS 1, boring capacity ø 8mm - 46 mm

Type AKS 2, boring capacity ø 8 mm - 280 mm

Mini

Standard

For combination end mill holders DIN 6366

Face mill holders DIN 2080

Drill chuck adaptors, DIN 2080

Reducing adaptors for MT tools with tang DIN 2080

Reducing adaptors for MT tools with thread, DIN 2080

Weldon chuck with cooling agent ring, DIN 2080

Blanks, DIN 2080

Reducing adaptors for MT tools with thread, DIN 69871

Weldon chuck with cooling agent ring, DIN 69871

Blanks, DIN 69871

NC-drill chucks DIN 69871

Screw-on type milling arbors DIN 69871 AD/B

Hydraulic expansion chuck DIN 69871 AD/B

Shrink chuck DIN 69871 AD/B

Face mill holders, DIN 69871

Reducing adaptors for MT tools with tang, DIN 69871

Wrench for coolant tubes

Test arbor - form A

Screw-on type milling arbors - form A

Hydraulic expansion chuck - form A

Shrink chuck - form A

Edge finder, electronical

Edge finders, mechanical

3D-edge finder - slim

Ejectors

Half automatic ejector

Hollow spindle stop

Face mill holders, MAS BT

End mill adaptors WELDON, MAS BT

Drill chuck adaptors, MAS BT

Reducing adaptors for MT tools with flat, MAS BT

Reducing adaptors for MT tools with thread, MAS BT

Weldon chuck with cooling agent ring MAS BT

Blanks, MAS BT

Screw-on type milling arbors MAS BT AD/B

Hydraulic expansion chuck MAS BT

Shrink chuck MAS BT

Combination shell mill adaptors with morse taper

End mill adaptors WELDON with morse taper

Collet chucks ER with morse taper

Driver arbors for reamers DIN 217 with MT

Collet chucks OZ with morse taper

In wooden case

ISO 7388 II B-OB, without bore

ISO 7388 II B-MB, with bore

S 20x2, with saw thread

DIN 69872 A, with bore

ISO 7388 II A, with bore

DIN 69872 B, without bore

MAS BT, 45°

MAS BT, 60°*

MAS BT, 90°

OTT, without internal bore

OTT, with internal thread

Quick-change tapping chucks with length compensation, morse taper shank

Quick-change tapping chucks with length compensation, DIN 2080

Quick-change tapping chucks with length compensation, DIN 69871

Quick-change tapping chucks with length compensation, MAS BT

Reductions sleeves for quick-change tapping inserts

With safety clutch

Without safety clutch

Reversal tapping chucks BASIC

Multi-range collets

Safety hood for chucks, foldable

Safety hood, slidable

Saw-blade holders

Spacing collars Form A

Spacing collars Form B

Safety-spanners ER mini

Safety-spanners ER

Spanners OZ

Spanners for cross screws DIN 6388

With roller-bearing

Collet chucks ER with cylindrical shank and standard nut

Reduction sleeves for Weldon chucks with coolang agent ring

Floating chucks with cylindrical shank

Removable tangs for morse taper shanks

Type HSK

Type ER

Type OZ

Type MT

Type SK

Tapping inserts

Extended tapping inserts

Collet sets with chuck in aluminium case

Aluminium case

Tool racks 3-staged, Type WR3K

Tool racks 1-staged, type WRS

Tool rack inserts

Clamping set

TIN-coated milling cutters

Universal work piece stop with magnet

Security wrench socket SK and MAS BT

Driving tenons

Accessories

Quick change tool holder


Boring bar holder

Cutting-off holder

Quick-change tool holder sets

Turret

Tool holder

Bar holder

Turret

Tool holder D

Bar holder H

Bush holder J

Cutting-off holder T

Cutting-off blade TS

Thread-cutting device for ext. FE

Thred-cutting device for int. FI

Bush with morse taper L

Prism P for bar holder H

Boring bar, for bush holder J, without tool

Centers


Fixed centres type 503 DIN 806 E

Fixed centres type 504 DIN 806 HE

Fixed tube centre

Fixed tube centre with draw-off-thread

Draw-off nut

Type 8410 DIN 228

Pointed centre

Large pointed centre

Taper

Copying centre

Set in a box

ROTOR Type DA-V, extended tip, regular turning

ROTOR Type DA-L, slim tip, regular turning

ROTOR, Type DA-K, set, regular turning

ROTOR Type DA-N, regular tip, regular turning

ROTOR Type E-B, pipe nose 60°

ROTOR Type E-N, regular tip

ROTOR Type E-V, extended tip 60°/40°

ROTOR Type N, regular tip for heavy-duty operations

ROTOR Typ L, schlanke Spitze

Revolving tailstock centre

Revolving tailstock centre

Revolving tube centre

Fixed centres Type 507 DIN 807 HE

Revolving tailstock centre, extended

Revolving tailstock centre, extended

Revolving tailstock centre

Revolving precision tube centre

Fixed centres series 500, Type 506 DIN 807 E

Fixed centres Type 508 DIN 807 WS

Fixed centres Type 501 DIN 806 WS

Fixed centres Type 505 DIN 807 WS

Revolving tailstock centre

Mitlaufende Präzisions-Drehbankspitze KOP

Revolving tailstock centre, extended

Heavy-duty revolving tailstock centre, extended

Heavy-duty revolving tailstock centre

Revolving tailstock centre for interchangeable inserts

Heavy-duty NC revolving tailstock centre for inserts

Turret head set

Readouts and scales


Zero Adjusters
background image
Telephone consultation (Monday - Friday 8.00 am – 5.00 pm)
+49 4321 25 2003-0